THE FINISHER CoverGuard

CoverGuard protects all textiles on your boat from environmental influences. After you have applied the water-based special textile sealant, water and dirt no longer stand a chance. Free from solvents and fluorocarbon resins. CoverGuard leaves a pleasant fresh scent and is suitable for all textiles, such as tarpaulins, spray hoods or upholstery, both indoors and outdoors. Thanks to the hydrophobic easy-to-clean effect, environmental dirt does not stick so easily: super easy cleaning after sealing.

First, thoroughly clean the surface to be sealed with our VinylTexClean or AllWays. The cleaned surface must be dry and free of residues before applying the sealant. Cover surrounding areas that should not be sealed with masking tape. Then apply CoverGuard evenly with a microfibre sponge, working it in crosswise. Allow to dry completely for 24 hours. After use, gently clean the sealed surfaces. If the effect slowly wears off, it can be refreshed by applying it again. You should make sure that the textile is clean. Do not use on hot surfaces. Test for compatibility in an inconspicuous area beforehand.

All types of textiles; tarps, sprayhoods, textile upholstery