COLOURLOCK Cabrio Colour Set grey brown dark

The Cabrio Colour Set for textile convertible tops offers a professional solution for refreshing and recoloring faded and discolored textile convertible tops. The set includes all the necessary products, including the soft top cleaner, the matching color refresher and the final textile impregnation. This enables efficient and long-lasting restoration of the convertible top's original appearance.

Our products are easy to use and can even be applied by non-experts. The scope of delivery includes detailed step-by-step instructions that guide you safely through the entire cleaning and staining process. The appropriate accessories are also included to ensure practical handling.

Important:
Test all products on a concealed area first to rule out possible changes.
Wear suitable protective gloves during all work steps.

1. cleaning - the basis for perfect results
1. fill 100 ml Pol Star into the empty, clear spray bottle
2. fill it up completely with warm water and unscrew the spray head
3. spray the dry or slightly damp soft top evenly in a place protected from the sun
4. work the cleaner in evenly with the Leather Brush synthetic
5. leave it on for 5-10 minutes (do not allow to dry)
6. repeat the cleaning process if necessary

Afterwards:
1. rinse the soft top thoroughly with clear water - preferably with a high-pressure cleaner - until there is no more dirt or cleaner left
2. allow the soft top to dry completely

2. paint refresher - brings back the color
1. cover or tape off areas not to be colored if necessary
2. shake Nubuck Fresh thoroughly and mix 300 ml with 2 % (6 ml) Crosslinker
3. divide the top into several sections and dye them one after the other so that no area remains untreated
4. work the Nubuck Fresh mixture evenly into the soft top with the application sponge
5. allow the soft top to dry completely after applying the paint

3. sealing - protection against moisture, dirt and environmental influences
1. make sure the surface temperature is between 10 °C and 40 °C
2. cover or mask surfaces that are not to be sealed if necessary
3. spray the Allround Textile Sealant generously onto a microfiber cloth
4. spread it evenly and thinly over the entire soft top
5. make sure that all areas are completely wetted and well worked in
6. then leave the soft top to dry for at least 24 hours (no rain, no moisture during this time)

4. care - so that the protection lasts a long time
1. clean the soft top only gently after sealing
2. refresh the protection by reapplying if the effect wears off (steps 1 and 3)

Tip:
Use enough material - too little leads to uneven and blotchy results
For a large soft top and a double coat of paint, we recommend 1 liter of Nubuck Fresh

Test all products on a concealed area first to rule out possible changes.
Wear suitable protective gloves during all work steps.