Instructions for use
Important:
Test all products on a concealed area first to rule out any possible changes.
1. Cleaning – the basis for perfect results
1. Pour 100 ml of Pol Star into the empty, clear spray bottle.
2. Fill it completely with warm water and screw on the spray head.
3. Spray the dry or slightly damp soft top evenly in a place protected from the sun.
4. Work the cleaner in evenly with the Allrounder Microfibre Sponge.
5. Leave it to work for 5–10 minutes (do not allow it to dry).
6. Use the Allrounder Scrubber for stains or green scale.
7. Repeat the cleaning process if necessary.
Afterwards:
1. Rinse the soft top thoroughly with clean water – preferably with a high-pressure cleaner – until no dirt or cleaning agent remains.
2. Allow the soft top to dry completely.
2. Sealing – protection against moisture, dirt and environmental influences
Preparation:
The soft top must be dry, clean and free of residues.
How to do it:
1. Ensure the surface temperature is between 10 °C and 40 °C.
2. Cover or mask off any areas that are not to be sealed, if necessary.
3. Spray the Allround Textile Sealant generously onto the Allround Microfibre Sponge.
4. Spread it evenly and thinly over the entire soft top.
5. Ensure that all areas are completely covered and well worked in.
6. Allow the soft top to dry for at least 24 hours (no rain or moisture during this time).
3. Care – to ensure long-lasting protection
Clean the soft top gently after sealing. Refresh the protection when its effect wears off by reapplying it.
Tip:
Less is more – apply sparingly and repeat the process if necessary. With regular care, your hood will remain protected in the long term and look like new.